Central Division:
Top
Post Frame Building Options - Central Division
Select the options that fit your needs!
- Pre-hung door with keyed lockset (white only)
- Standard size – 3' X 6'8"
- Economy, Utility or Heavy Duty
- Available with 22" X 36" glass (with or without divided lite)
- Custom doors are available
Learn More...
2. Insulation
- "SolarGuard" high performance reflective insulation consists of a ¼" fiberglass core bonded to an exterior layer of 99% pure aluminum and an interior layer of durable scrim-reinforced facing material
- Excellent R-Values (R+/- 11)
- Great Vapor Barrier
- Reduces Condesation
- Superior Flame/Smoke Ratings
- Manufactured by CGI-Silvercot, Inc.
Learn More...
- Single-Hung Vinyl Windows with 5/8" insulated glass
- Standard sizes: 2'X3', 3'X3', 3'X4', 3'X5' (divided lite is standard)
- Standard color is white
- Custom windows are available
- Manufactured by Atrium, Inc.
Learn More...
Back to Top
4. Post Protector
- Moisture and Insect protection
- Uplift protection
- Lifetime warranty
- Continuous venting
- Environmentally safe
- Add value to your building
Learn More...
5. Soffit & Fascia
- Metal Soffit Panel with Ventilation
- Metal Fascia Trim
- Standard size is 12" (also available in 18" or 24")
- Many colors to choose from
Learn More...
- 3' X 3' vent
- 29 gauge steel
- 29" steel weathervane
- Many colors available
- Also available in 2'X 2' or 4'X 4'
- Weathervanes: Rooster, Eagle, Horse, Cow, Pig, Deer (may also be purchased separately)
Learn More...
Back to Top
- 16 gauge steel frame
- ¾"plywood core with 29 gauge metal
- Many colors available
- Horse Friendly; Top section can swing separately and latch against wall
Learn More...
8. Dutch Window/Bale Door
- 3' X 3' with metal cladding
- Crossbuck design
- Latching hardware
- Custom sizes available
Learn More...
9. Horse Stalls
- 10' or 12' front with grill
- 4' sliding door with grill
- Powder coated finished (many colors)
- Dividers with grills on solid wood
- Swing-out feeders and drop down panels are available
- Manufactured by Rockin-J Horse Stalls
Learn More...
Back to Top
- 10' low profile
- Ideal for attic ventilation
- Bird proof
- Many colors
Learn More...
11. Gable Vent
- 24" X 30" steel louver with screen
- Standard color is white
Learn More...
12. Skylights
- Polycarbonate panel with 10 year limited warranty. 6' exposed on roof or 3' exposed on walls.
Learn More...
Back to Top
13. Single Slider
- Typical width: 10' or 12' (cannot exceed 12’ wide)
Learn More...
- Typical width; 12', 14', 15', 20' (width of door is limited by width of building)
Learn More...
15. Slider w/Crossbucks
- Sliding doors are available with crossbuck design. Plywood backing with flat metal background – 1" X 4" crossbucks with metal trim.
Learn More...
Note:
- Door clearance is 1’ lower than wall height
- Steel vertical rails are standard
- Track and rollers as manufactured by National Hardware
- Doors latch from the inside
- Color matches the walls, unless requested otherwise
- Wheel at bottom of wall for easy sliding
- Split slider has interlocking steel meeting rail and center latch
- Bottom door track is not standard, but available at additional cost
Back to Top
16. Roll-Up Door
- Typical width: 10' or 12'
- Typical height: 8' or 10'
- 26 gauge steel, commercial grade curtain
- 16 gauge galvanized steel drum with steel ball bearings
- 14 gauge door guides
- Vinyl weatherstripping
- Bright white is standard
Learn More...
17. Frame-Outs
- Typical width; 8', 9', 10', 12' or 16'. Openings are framed and trimmed for an overhead door (door by others). Angled corners are optional.
Learn More...
Note:
- Height is limited by the clearance needed for the housing or track – typical clearance is 2’, therefore the door height is 2’ lower than the wall height
- If you are pouring a concrete slab you must allow for the thickness of the concrete under the door
- Check with your door supplier to verify the rough opening size and required clearance
Back to Top
20. Roof Overhang
- Roof extended on gable (end wall).
Learn More...
Note:
- Metal ceilings are not included with these options unless noted otherwise on the contract
- Drop porches/sheds are also available
Back to Top
23. Closure Vent
- Vented form strips under ridge cap
Learn More...
Back to Top
24. Rat Guard
- Metal trim to close the ribs at the bottom of the wall
Learn More...
26. Exhaust Fan
- Automatic back draft damper and adjustable thermostat with 18”X18” louver (electric by others)
Learn More...
Back to Top
27. Tack Rooms/Feed Rooms
- Interior room, typical size 10’X10’, 12’X12’. Metal or 2”X6” wood walls. Available with or without wood decking across top
Learn More...
28. Sturdi-Wall Brackets
- Sturdi-Wall brackets are a heavy duty anchor system designed to connect post frame structures to traditional concrete foundations such as: monolithic slabs, formed walls, and existing concrete pads.
- There are two types of Sturdi-Wall brackets. When drill setting is preferred, the standard Sturdi-Wall is used. When setting into wet concrete, the Sturdi-Wall Plus is used.
Learn More...

Testimonials
"No one else was even close to your reasonable price, the speed of construction, and the quality of your materials. I would certainly recommend National Barn Company to anyone searching for a high quality, affordable barn."
S. McNeil
Devers, TX